Lancia Beta 1300 Coupé, 1980
Lancia Beta 1300 Coupé, Jahr 1980. Farbe dunkelblau (Lancia Blue 438) kombiniert mit einem grau/schwarzen Interieur. Graue Stoffsitze, schwarzer Teppich und schwarz/graue Türverkleidungen. Dieses wunderschöne Lancia Beta Coupé wurde vor kurzem aus Italien importiert, wo es von seinem ersten Besitzer, Herrn Giommi in Pesaro, gekauft wurde. Dieses Lancia Beta Coupé befindet sich in einem fantastischen und WIE NEUEN originalen Top-Zustand! Das Auto hat von neu nur 16,871 Kilometer gefahren! Sie werden kein anderes Exemplar in diesem Top-Zustand finden! Das Auto wird komplett mit seinen originalen Handbüchern / Broschüren und dem originalen Werkzeugsatz geliefert. Das Auto wurde im August 2021 auf den neuesten Stand gebracht. Mit dem Tachostand 16.839 erhielt das Auto einen Vollservice, bei dem der Zahnriemen erneuert wurde. Auch wurden neue Pirelli-Reifen montiert. Dies ist ein wunderschönes Lancia Beta Coupé mit geringer Laufleistung in einem sehr begehrenswerten originalen und perfekten Sammlerzustand!
ARCHIV | VERKAUFT
The Lancia Beta Coupé was introduced at the Frankfurt Motor Show in 1973 with 1600 and 1800 cc engines. The Beta Coupé was based on the Beta saloon, it shared the same mechanical components but it was a livelier car because of the lower weight. The 1600 engine delivered 107 bhp and the 1800 engine a healthy 121 bhp. In combination with the 5-speed gearbox, independent suspension all round, and servo assisted disc brakes on all four wheels, the roadholding and the ride were very good. The second series with several updates and modifications was presented in 1975. The 1800 engine was replaced by a 2000 cc unit and the car received a frontal update with a new grille and headlamps. In 1976 the Lancia Beta 1300 Coupé was added to the Lancia line-up to replace the Lancia Fulvia 1300 Coupé. The car was presented at the Turin motor Show with the plain name Lancia 1300 Coupé. Where the Fulvia featured a 1300 cc V4 engine, the 1300 Coupé was fitted with a four cylinder in-line engine like its more powerful sister cars. The Lancia 1300 Coupé had a more sober appearance with less exterior chrome. Despite the smaller 1300 engine which presented Italian owners with lower taxes, and better fuel economy, the 1300 was still an expensive and very exclusive car. 11.427 examples were built from 1976 until 1978 making the Lancia 1300 Coupé a rare sight in the 21st century.
Four cylinder in line engine
cast iron engine bloc with aluminium cylinder head (OHV)
capacity: 1297 cc
induction: 1 x twin choke Weber 32 DMTR 31 carburettor
capacity: 82 DIN bhp. at 5800 rpm
torque: 110 Nm at 3300 rpm
top-speed: 101 mph. - 166 km/h
gearbox: 5-speed, manual, front wheel drive
brakes: servo assisted disc brakes around
weight: 980 kg.
Lancia & Co. was established in the year 1906 in Turin, Italy.
Vincenzo Lancia founded his firm in cooperation with his friend and colleague Claudio Fogolin. Vincenzo Lancia and Claudio Fogolin both worked as technicians and racing car (test) driver at the Fiat motor company.
The first Lancia prototype was damaged completely by a fire in the factory so the first Lancia automobile was presented a year later; in 1908.
The first Lancia was the "tipo 51" which was named Alpha (The "A" in the Greek alphabet). In the following decades Lancia would be naming lots of cars with capitals out of the Greek alphabet. The Lancia Alpha was fitted with a cleverly constructed small four cylinder engine with a capacity of 58 bhp. Those days an enormous capacity!
The Lancia automobiles were known for being extremely fast and characteristic by design. Between the years 1910 and 1920 Lancia primarily built fast middle class tourers. The firm was an active innovator and always ahead with technical and mechanical solutions.
One day Vincenzo Lancia found himself on a ship in a monstrous sea. Seeing the ships hull fighting the demonic waves he stated; a car should be as firm and strong as a ships hull... This wet experience and the idea of the ships hull inspired Vincenzo to develop a car with a unitary bodywork structure... This car, the Lancia Lambda, was presented to the public in the year 1922. This was the first car ever built with a unitary body structure; body and chassis finally merged...
Mechanically the Lancia Lambda was also far ahead of the contemporary competitors. The car featured a unique V4 engine with twin overhead camshafts, independent front suspension and brakes all round.
The Lancia Lambda was extensively tested in the Alpes.
The light car with stiff bodywork and powerful engine proofed to be blessed with excellent road holding capabilities!
The Lambda was built with several bodywork variant until 1931 as it was succeeded by the Lancia Dilambda.
The Dilambda was a step back in time concerning the concept; the car was constructed with a separate chassis again. Those days it was common to buy a rolling chassis on which specialized firms created the bodywork for customers. The Lambda came too early, the industry was not ready so Lancia returned to common ground with the Dilambda... The Dilambda was fitted with an eight cylinder engine. Up to 1936 Lancia built the models Augusta, Astura, Arteria en Ardea. These cars were bodied by the famous Italian bodywork specialists.
In the year 1936 the unitary bodywork structure was introduced again (14 years after the introduction of the Lancia Lambda) with the presentation of the beautiful Lancia Aprilia.
The Lancia Aprilia featured independent suspension all round (!), hydraulic brakes (!), drum brakes placed near to the differential at the rear (!) and an aluminium V4 engine (!).
Next to designing and producing road cars Lancia was also very involved in building racing cars... Lancia racing cars were very often fitted with new innovative constructions which had to prove their value on the racing track.
Amongst others the famous racecar driver Emmanuel Fangio drove for Lancia in the fifties of the twentieth century. He also drove the Pan America race in 1953.
In fifties of the twentieth century Lancia built it's most beautiful automobiles ever. These cars were far ahead of the competition with their unitary bodywork structure, V4 and V6 engines with overhead camshafts and all the innovations Lancia developed for the succeeding models.
The Lancia Appia Series 1 and II (1953-1959) was a beautifully designed compact car which was mechanically less complex than the other contemporary Lancia models. Between 1956 and 1962 various stunning specials were built, by Pinin Farina, Zagato and Vignale, based on the Appia.
In the year 1950 the Lancia Aurelia was presented to the public. The Aurelia was available as saloon model (B10, B21, B22, B12), from 1953 also as 2+2 coupe model (B20-2500 GT), and from 1954 as Spider and Convertible models (B24).
The Aurelia B20-2500 GT and the Aurelia B20 Spider are the absolute highlights in the Lancia history and both were designed by Pinin Farina!
The Aurelia series was succeeded by the Lancia Flaminia series in the year 1957.
With the Flaminia series Lancia introduced a very luxurious automobile in the top range. The Flaminia was another Lancia showcase of innovation and the cars featured beautiful designs. Because of the expensive technical and mechanical components the Lancia Flaminia was a very expensive automobile.
The Lancia Flaminia series featured: independent suspension all round, De Dion rear axle with integrated gearbox (transaxle), disc brakes all round and an aluminium 2775 cc. V6 engine. We identify the following Lancia Flaminia models:
The Flaminia Berlina (1957-1970), the Lancia Flaminia Coupe (1958-1967), the Lancia Flaminia GT/ GTL (1958-1967) and the Lancia Flaminia Sport and Super sport Zagato (1958-1967)
All Flaminia models together a little over 10.000 were ever built.
In the year 1960 a new model was born; the Lancia Flavia.
The Lancia Flavia was positioned between the Lancia Appia and the Lancia Flaminia model series. With the presentation of the Flavia model series Lancia introduced it's first front wheel drive car. The decision to use front wheel drive was made from economic point of view; the construction could be built less complex and considerably cheaper. The Flavia was also fitted with a less complex beam rear axle. The brake system was state-of-art again; disks all round with a dual circuit brake system. In 1965 fuel injection was introduced for the Flavia model series.
We identify the following Lancia Flavia Models:
Lancia Flavia Berlina (1960-1966), the Lancia Flavia Coupe (1962-1968), the Lancia Flavia Convertible (1962-1969) and the Lancia Flavia Sport Zagato (1963-1967).
In the year 1969 the financial position of Lancia was very bad. The expensive, advanced automobiles generated not enough profit to survive, there was no chance Lancia would survive on it's own so the make was taken over by FIAT.
In the year 1969 the Lancia Flavia Berlina and Coupe became available with slightly redesigned bodywork and a new engine; the V4 Fulvia engine. The modernized Flavia was built until the year 1974.
In the year 1963 the Lancia Fulvia was presented to the public. The Berlina model shows a great resemblance with the Lancia Flavia Berlina. The Lancia Fulvia was ftted with the smaller V4 engine powering the front wheels. The Lancia Fulvia series was fitted with independent suspension and disc brakes all round. In the year 1965 the show stopper in the Fulvia series was presented; the Lancia Fulvia coupe... the HF version of this car has won many, many international rally events.
The Lancia Fulvia was also available as Zagato Sport model.
In the year 1970 the unique Lancia Stratos saw the light of day. A Bertone designed futuristic show model which was chosen by Lancia to compete in the international rally championships. The Stratos proved to be very successful just like the Fulvia HF.
Between the years 1972 and 1984 the following Lancia models were presented:
The Lancia Beta (Berlina, Coupe, Spider, HPE and Montecarlo), the Stratos successor Lancia Rally 037 and the Lancia Gamma saloon.
© Marc Vorgers